TECHNIPOL® Bio 1120

TECHNIPOL® Bio 1120

Polybutylene succinate
PBS

TECHNIPOL® Bio 1120 is an aliphatic co-polyester, characterized a low melting point.

Due to its formulation, it can be used in biodegradable and compostable compounds. Furthermore, it exhibits a good compatibility with other biodegradable polymers as polylactic acid and starch.

It can be used as support polymer for master-batches both in granules and in powder form.

Usable for injection molding.

SIPOL - Fork Logo

FDA e EU 2011
food contact compliance

SIPOL - Risorsa rinnovabile Logo

It can be manufactured from
Renewable resources monomers

TECHNICAL CHARACTERISTICS

Density ASTM D 792 │ ISO 1183 g/cm3 1,26
Melting temperature ASTM D 3418 │ ISO 11357-3 °C 113
Hardness (Istantaneous) ASTM D 2240 │ ISO 868 Shore D 61
Strength at break ASTM D 638 │ ISO 527 MPa 50
Elongation at break ASTM D 638 │ ISO 527 % 450
Flexural modulus ASTM D 790 │ ISO 178 MPa 450
Water absorption (23°C x 24h immersion) MI / 08 % 0,4
Viscosity – MFI 190°C 2.16 Kg ASTM D 1238 │ ISO 1133 g/10 min 25

USES

Cosmetics/Personal Care
Masterbatch Bio
Consumer Goods
Polymer modifier

PACKAGING

25 kg bags equipped with an aluminum film barrier against moisture action.

500 kg cardboard octabins equipped with an inner PE liner.

STORAGE

Product can be stored for 6 months if stocked in a cool and dry place and protected from light.

When stocked around 5 – 10°C or below, it is recommended to keep it at 15 – 20°C for at least for 24 hours before using it.

AVAILABLE VERSIONS

TECHNIPOL® Bio 1124

> 40% renewable resources content

TECHNIPOL® Bio 1125

> 50% renewable resources content

TECHNIPOL® Bio 1129

100% renewable resources content