SIPOLPRENE® 35195 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by SIPOL®, with a nominal hardness of Shore D 36, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.
SIPOLPRENE® 35195 comes in a natural colour with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations.
Black colour and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.
FDA e EU 2011 food contact compliance
Polymer modifier
| Density | ASTM D 792 │ ISO 1183 | g/cm3 | 1,11 |
| Hardness instantaneous / 15 s | ASTM D 2240 │ ISO 868 | Shore D | 36/33 |
| Stress at break | ASTM D 638 │ ISO 527 | MPa | 22 |
| Elongation at break | ASTM D 638 │ ISO 527 | % | 750 |
| Flexural modulus | ASTM D 790 │ ISO 178 | MPa | 45 |
| Tear strength | ASTM D 1004 | N/mm | 112 |
| Melting temperature | ASTM D 3418 │ ISO 11357-3 | °C | 195 |
| Glass transition temperature | ASTM D 3418 │ ISO 11357-2 | °C | -45 |
| Vicat A/50 | ASTM D 1525 │ ISO 306 | °C | 137 |
| Abrasion resistance | ASTM D 1044 (Taber H-18 1Kg) | mg/1000 rev | 60 |
| Water absorption (23°C x 24 h immersion) | MI 08 | % | 0,7 |
| Viscosity – MFI 230°C 2.16 Kg | ASTM D 1238 │ ISO 1133 | g/10 min | 28 |
| Izod impact resistance/notched (23°C) | ASTM D 256 │ ISO 180 | J/m | No break |
| Izod impact resistance/notched (-40°C) | ASTM D 256 │ ISO 180 | J/m | No break |
 |
Automotive |
 |
Industrial |
 |
Cosmetics/Personal Care |
 |
Packaging |
 |
Consumer Goods |
 |
Sports and Leisure |
 |
Electric/Electronic |
 |
Polymer modifier |